Race Ramps 2-pc 56-inch Race Ramp - RR-56-2

Description

Race Ramps 2-pc 56-inch Race Ramp - RR-56-2
Race Ramps RR-56-2 2-pc 56-inch Race Ramps One of the very first products we ever designed, 56″ Race Ramps have been praised world-wide for how easy they are to use with low-to-the-ground cars such as Corvettes and Mustangs. They lift your car a full 8” off of the ground with a gentle 10.8 degree incline, and they fit tires up to 10” wide. Each ramp can hold up to 1,500 lbs., for a total vehicle weight capacity of 6,000 lbs. Both ramps have an attached carrying strap for easy transport and storage. They can be purchased in a one-piece or two-piece design. The two-piece set gives you even greater maneuverability under the car: once your tires are in place (and chocked!), you can remove the incline portion of the ramp for additional side access. Whether you’re putting your car on display for a show, giving it a tune up, or just changing the oil, these ramps will be instant favorites. Features: Ideal for C5-C7 Corvettes. The ZR1 Corvette will require the XTender due to the splitter. 100% solid, made with a high-density expanded polystyrene that is coated with a hybrid polyurea. Lightweight, yet strong and durable. Will not rust or transfer heat or cold. No-skid, no-scuff material protects your garage flooring from damage. Comes with a carrying strap for easy transport and storage. Sold as a set of two. When buying directly from this site, they come with a 30-day satisfaction guarantee. Proudly made in the USA! Usage: Use on a level, flat surface. Ensure that the bottom of the ramps make full contact with a solid surface. Do not exceed the recommended maximum tire width. Never accelerate or apply brakes suddenly. Drive up on ramps in a slow, steady pace. When the vehicle is in place, put it in park (or in reverse gear for manual transmissions) and set the emergency brake. Place wheel chocks behind each tire during use. Specifications: Dimensions: 56”L x 12”W x 10”H (8” of lift) Angle of approach: 10.8 degrees Ramp weight capacity: 1,500 lbs. per ramp Total weight capacity: 6,000 lbs. per set Maximum tire width: 10” Product weight: 10 lbs. per ramp Shipping: weight of 13 lbs., box size of 56.625”L x 12.5”W x 11.75”H Sold as: one-piece design (RR-56) or two-piece design (RR-56-2).
Race Ramps RR-56-2 2-pc 56-inch Race Ramps
One of the very first products we ever designed, 56″ Race Ramps have been praised world-wide for how easy they are to use with low-to-the-ground cars such as Corvettes and Mustangs.
They lift your car a full 8” off of the ground with a gentle 10.8 degree incline, and they fit tires up to 10” wide. Each ramp can hold up to 1,500 lbs., for a total vehicle weight capacity of 6,000 lbs.
Both ramps have an attached carrying strap for easy transport and storage. They can be purchased in a one-piece or two-piece design. The two-piece set gives you even greater maneuverability under the car: once your tires are in place (and
chocked!
), you can remove the incline portion of the ramp for additional side access.
Whether you’re putting your car on display for a show, giving it a tune up, or just changing the oil, these ramps will be instant favorites.
Features:
Ideal for C5-C7 Corvettes. The ZR1 Corvette will require the
XTender
due to the splitter.
100% solid, made with a high-density expanded polystyrene that is coated with a hybrid polyurea.
Lightweight, yet strong and durable.
Will not rust or transfer heat or cold.
No-skid, no-scuff material protects your garage flooring from damage.
Comes with a carrying strap for easy transport and storage.
Sold as a set of two.
When buying directly from this site, they come with a 30-day satisfaction guarantee.
Proudly made in the USA!
Usage:
Use on a level, flat surface.
Ensure that the bottom of the ramps make full contact with a solid surface.
Do not exceed the recommended maximum tire width.
Never accelerate or apply brakes suddenly. Drive up on ramps in a slow, steady pace.
When the vehicle is in place, put it in park (or in reverse gear for manual transmissions) and set the emergency brake.
Place wheel chocks behind each tire during use.
Specifications:
Dimensions:
56”L x 12”W x 10”H (8” of lift)
Angle of approach:
10.8 degrees
Ramp weight capacity:
1,500 lbs. per ramp
Total weight capacity:
6,000 lbs. per set
Maximum tire width:
10”
Product weight:
10 lbs. per ramp
Shipping:
weight of 13 lbs., box size of 56.625”L x 12.5”W x 11.75”H
Sold as:
one-piece design (RR-56) or two-piece design (RR-56-2).
eBay integration
by