NEW! Mitering Bandsaw - 6.5" Round - 2.5 HP - 120V - 60 Degree - Dake!!

Description

NEW! Mitering Bandsaw - 6.5" Round - 2.5 HP - 120V - 60 Degree - Dake!!
SHIPPING IS IN THE LOWER 48 STATES-SHIPS TRUCKLINE
Usually ships
in 5 to 8 days
Mitering bandsaw with dual operating modes and hydraulic controlled down feed. 2.5HP, 120V motor with up to 60 degree right mitering capabilities. Ergonomic design for operator’s comfort and control. Variable speed with rotary adjusting wheel and “Constant speed control” Maintains constant speed to prevent bog downs when cutting
Specifications:
Model:
983110-2
Capacity:
6.5" Round
Horsepower:
2.5 HP
Voltage:
120 V
Maximum blade speed:
Variable
Blade width:
3/4"
Blade length:
84-1/4"
Blade speed:
114-262 FPM
Solid round 90° capacity:
6-1/2"
Solid round 45° right capacity:
4-1/4"
Solid round 60° right capacity:
3"
Solid square 90° capacity:
6-3/4"
Solid square 45° right capacity:
4-1/2"
Solid square 60° right capacity:
3"
Solid rectangle 90° capacity:
7-3/4" x 3"
Solid rectangle 45° right capacity:
6" x 4-1/4"
Solid rectangle 60° right capacity:
4" x 2-3/4"
Worktable height:
37"
Height:
65"
Floor space:
35" x 48"
Floor space left to right:
35" x 48"
Floor space front to back:
35" x 48"
Floor to bed:
Features:
Hydraulic controlled down feed with manual return
Automatic shut off at the end of the cut
Dual operating modes, manual cutting or head feed cutting
Powerful, manual clamping vise, with quick release lever for rapid vise opening and closing action for fast material size change over. The vise clamps material firmly.
Ergonomic designed for operator’s comfort and control
Motor gearbox combination bolted to the bow for less vibration
Variable speed with rotary adjusting wheel and “Constant speed control” Maintains constant speed to prevent bog downs when cutting
CE Certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch
Blade tensioning is done via. “Go No Go” tensioning system with LED taking the guess work out of tensioning. Saw will not run if blade tension is not correct
Miters up to 60° right. Mitering pre-sets with slide stops makes set up fast and has precise with miter scale for all angles in between. The head turns-the material doesn’t
Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable
Electric coolant pump and self-contained coolant system
120 volt means you can use it most anywhere
Steel fabricated base, and stock stop gauge, one Bi-metal blade
T9CB2300650
Product Specifications
DESCRIPTION
Mitering Bandsaw
BRAND
Dake
CUTTING CAPACITY
6.5" Round
MANUFACTURERS PART NUMBER
SE-6.5 M
STYLE
Horizontal
MOTOR PHASE
Single
MOTOR HORSEPOWER
2.5 HP
MOTOR VOLTAGE
120V