DC 12V Temperature Speed Controler Denoised Speed Controller for PC Fan/Alarm

Description

DC 12V Temperature Speed Controler Denoised Speed Controller for PC Fan/Alarm
Operating voltage:DC12V can work in 9-14V range
Fan interface:2510-3P bend (pin spacing 2.54mm)
Fan current:Less than 0.8A
Protection Input reverse connection protection
Click the button switch to upshift and double click the downshift
No output overload protection!!! Please note that the output should not be short circuited or overloaded
Drive output range 5% -100 part fan low output may not turn,please adjust the fan can start the use of position
Operating temperature:-20 Celsius to 60 Celsius
Temperature probe parameters:NTC 50K B=3950
Probe temperature:Small black head 120 degrees
Ring probe 110 Celsius
Fan interface extends 8mm
Setting parameters default factory Low speed 20%.
Acceleration temperature 30
Acceleration width 5
Do not shut down the output
At this temperature setting,holding the probe with the palm of the hand will accelerate in a few minutes.If the probe is clamped into the armpit,it will reach full speed in 2 minutes
Size:4.9x1.8cm/1.93x0.71inch
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item.Thank you!
Package Includes:
1x DC 12V Temperature Speed controler
1x Probe